Managing SBC Devices

The Known SBCs page displays a list of all connected SBC devices. You can perform the following actions:

Reload from OVOC: Updates the list of SBC devices that are connected to Live Platform Operation Center User Management Pack 365 SP Edition
Add SBC Devices: Add new SBC devices which can then later be configured for new customers and site locations when onboarding new customers in the Onboarding wizard.
Show SIP Connections: Show a list of configured SIP Connections that are connected to specific SBC devices.
Show Prefixes: Show a list of configured number prefixes in the dial plans loaded to the managed SBC devices.
Upload Dial Plan Rules from Managed SBC Device: Imports dial plans from the SBC device and in the process creates a customer service.
To display list of managed SBC devices:
1. In the Multitenant portal Navigation pane, select Configuration > SBC.

The table below describes the details for each managed SBC device.

Parameter

Description

Id

Id of the Known SBC entry.

OVOC SBC Id

Id of the OVOC SBC.

Name

Known FQDN of the SBC device/NAT IP address.

NAT IP Address

NAT IP address of the SBC device.

Device FQDN

Known FQDN of the SBC device.

HTTPS

Indicates whether HTTPS is enabled for the device.

Gateway User

The name of the administrator user account of the SBC.

Status

The status of the connection between UMP-365 and the SBC.

SIP Users Count

The number of SIP users registered for the SBC.

Site Count

The number of site locations that are configured with the SBC.